Space Wolf DT140

Das ist der Space Wolf DT140 FPV Racer Quad. Nur 3 Zoll aber so richtig schnell. Der FuriBee X140 war schon gut aber der DT140 ist deutlich schneller mit den 1408 starken Motoren. Der Rahmen ist wie bei X140 mit austauschbaren Armen und groß genug für eine Runcam Split Mini die wie GoPro in HD aufnimmt.

Video 1 – Space Wolf DT140 viel schnell als FuriBee X140

Holt Euch den DT140
https://goo.gl/XKeUw6

DT160 der fast gleich ist wie DT140
https://goo.gl/N5myB7

oder den X140 der leichter ist
https://goo.gl/uFpTQC

Da leider der DT140 oder DT160 ausverkauft ist ist der helifar X140 PRO genau so gut und hat eine bessere CCD Kamera.
https://goo.gl/5WhZtz

Passende Runcam Micro Swift 3
https://goo.gl/95TH2E – Gearbest
https://goo.gl/V19oLp – Banggood Coupon: aff7off

Original Konfiguration
Auf dem DT140 ist Betaflight 3.3.0 mit folgenden Änderungen (diff):

# Betaflight / OMNIBUSF4 (OBF4) 3.3.0 Mar  2 2018
name DT140
feature LED_STRIP
feature ANTI_GRAVITY
feature DYNAMIC_FILTER
serial 0 64 115200 57600 0 115200
serial 2 8192 115200 57600 0 115200
led 0 6,7::CO:8
led 1 6,8::CO:8
led 2 9,7::CO:8
led 3 9,8::CO:8
aux 0 1 0 900 1300 0
aux 1 2 0 1300 1700 0
aux 2 13 4 1700 2100 0
aux 3 19 6 1700 2100 0
aux 4 26 7 1700 2100 0
aux 5 28 1 1300 2100 0
aux 6 35 3 1700 2100 0
set mag_hardware = NONE
set baro_hardware = NONE
set rssi_channel = 16
set fpv_mix_degrees = 10
set serialrx_provider = SBUS
set motor_pwm_protocol = DSHOT600
set current_meter = NONE
set beeper_dshot_beacon_tone = 2
set small_angle = 85
set pid_process_denom = 2
set osd_vbat_pos = 2465
set osd_rssi_pos = 2137
set osd_tim_1_pos = 54
set osd_tim_2_pos = 2519
set osd_flymode_pos = 2509
set osd_throttle_pos = 225
set osd_vtx_channel_pos = 377
set osd_crosshairs = 2282
set osd_ah_pos = 2282
set osd_current_pos = 385
set osd_mah_drawn_pos = 353
set osd_craft_name_pos = 2092
set osd_gps_speed_pos = 218
set osd_gps_lon_pos = 82
set osd_gps_lat_pos = 65
set osd_gps_sats_pos = 51
set osd_home_dir_pos = 302
set osd_home_dist_pos = 303
set osd_compass_bar_pos = 266
set osd_altitude_pos = 247
set osd_pid_roll_pos = 423
set osd_pid_pitch_pos = 455
set osd_pid_yaw_pos = 487
set osd_debug_pos = 1
set osd_power_pos = 321
set osd_pidrate_profile_pos = 345
set osd_warnings_pos = 2441
set osd_avg_cell_voltage_pos = 2497
set osd_pit_ang_pos = 257
set osd_rol_ang_pos = 289
set osd_battery_usage_pos = 392
set osd_nheading_pos = 311
set osd_nvario_pos = 279
set osd_esc_tmp_pos = 82
set osd_esc_rpm_pos = 83
profile 0
rateprofile0
set roll_srate = 78
set pitch_srate = 78
set yaw_srate = 76

Meine Konfiguration
Auf dem DT140 ist Betaflight 3.4.0 mit folgenden Änderungen (diff):

# Betaflight / OMNIBUSF4 (OBF4) 3.4.0 Jul  8 2018
board_name OMNIBUSF4
manufacturer_id AIRB
name DT140
feature -RX_PARALLEL_PWM
feature RX_SERIAL
feature TELEMETRY
feature LED_STRIP
feature AIRMODE
beeper -SYSTEM_INIT
beeper -ON_USB
serial 0 64 115200 57600 0 115200
serial 2 8192 115200 57600 0 115200
led 0 6,7::CO:8
led 1 6,8::CO:8
led 2 9,7::CO:8
led 3 9,8::CO:8
aux 0 0 0 1700 2100 0
aux 1 1 1 900 1300 0
aux 2 2 1 1300 1700 0
aux 3 13 2 1700 2100 0
aux 4 35 3 1700 2100 0
set acc_calibration = -114,66,-43
set mag_hardware = NONE
set baro_hardware = NONE
set rssi_channel = 16
set rc_smoothing_type = FILTER
set fpv_mix_degrees = 20
set serialrx_provider = IBUS
set motor_pwm_protocol = DSHOT600
set current_meter = NONE
set beeper_dshot_beacon_tone = 5
set small_angle = 85
set pid_process_denom = 1
set osd_vbat_pos = 2465
set osd_rssi_pos = 2137
set osd_tim_1_pos = 54
set osd_tim_2_pos = 2519
set osd_flymode_pos = 461
set osd_throttle_pos = 225
set osd_vtx_channel_pos = 377
set osd_current_pos = 385
set osd_mah_drawn_pos = 353
set osd_craft_name_pos = 2508
set osd_gps_speed_pos = 218
set osd_gps_lon_pos = 82
set osd_gps_lat_pos = 65
set osd_gps_sats_pos = 51
set osd_home_dir_pos = 302
set osd_home_dist_pos = 303
set osd_compass_bar_pos = 266
set osd_altitude_pos = 247
set osd_pid_roll_pos = 423
set osd_pid_pitch_pos = 455
set osd_pid_yaw_pos = 487
set osd_debug_pos = 1
set osd_power_pos = 321
set osd_pidrate_profile_pos = 345
set osd_warnings_pos = 2441
set osd_avg_cell_voltage_pos = 2497
set osd_pit_ang_pos = 257
set osd_rol_ang_pos = 289
set osd_battery_usage_pos = 392
set osd_nheading_pos = 311
set osd_nvario_pos = 279
set osd_esc_tmp_pos = 82
set osd_esc_rpm_pos = 83
profile 0
set dterm_notch_cutoff = 0
set setpoint_relax_ratio = 10
set dterm_setpoint_weight = 100
set iterm_relax = RP
rateprofile 0
set roll_srate = 78
set pitch_srate = 78
set yaw_srate = 76

Mein Equipment:
Fatshark Dominator HD3 – https://goo.gl/6Z9eU4
Eachine Pro58+Achilles – https://goo.gl/x4v74Z
FrSky TARANIS Q X7 Funke – https://goo.gl/NLlhjc
FrSky X9D Plus SE Funke – https://goo.gl/KlnCoS
iRangeX IRX4 Plus Multiprotokol Modul – https://goo.gl/uF6Co8
FrSky XM Empfänger – https://goo.gl/5InfW5
FrSky R-XSR Empfänger – https://goo.gl/4YM9LH
FrSky XSR Empfänger – https://goo.gl/00SGNz
Flysky FS-i6 – https://goo.gl/zUEYnB
Turnigy Evolution – https://goo.gl/tzphLP
Fli14 Plus Empfänger – https://goo.gl/cbWDKs
RunCam Split Mini – https://goo.gl/mjJWvd
RunCam Micro Swift 3 – https://goo.gl/YK9yFr
RunCam Micro Sparrow 2 Pro – https://goo.gl/A3LjgC
RunCam Micro Eagle – https://goo.gl/cqE7t6