Banggood Coupon: TTxBG10 http://bit.ly/SaFlyX

Happymodel Sailfly-X 105mm Crazybee F4 PRO 2-3S Micro FPV Racing Drone PNP BNF w/ 25mW VTX 700TVL Camera
2S FPV Racer wie der Toothpick, aber mit 3S Lipo ist der kleiner super schnell und gerade 60 Gramm leicht.
Die FPV Kamera liefert ein sauberes Bild mit dem 25mW Video Sender. Er fliegt schon mit 2S LiPo sehr schnell.

Video 1 – Happymodel Sailfly X Micro FPV Racing Drohne

Video 2 – Sailfly X Micro FPV und FuriousFPV True-D X Modul FPV Video

Video 3 – Sailfly X 3S Freestyle mit 64 Gramm BetaFlight 4.0

Pros:
– Gute Flugeigenschaften
– Sehr leicht nur 38 Gramm
– sehr günstig
– Rahmen robust genug bei dem Gewicht

Contra:
– Schlechter Empfang mit internem Empfänger
– nur 25mW Video Sender
– keine CCD Kamera
– CrazyBee F4 kann schon durchbrennen

Meine Konfiguration
Auf dem Sailfly-X habe ich Betaflight 4.0.2 aufgespielt mit folgenden Änderungen (diff):

# diff 2019-06-02
# Betaflight / CRAZYBEEF4FR (C4FR) 4.0.2 May  5 2019
batch start
name Sailfly X
resource MOTOR 1 B07
resource MOTOR 2 B08
resource MOTOR 3 B10
resource MOTOR 4 B06
feature -TELEMETRY
feature -ANTI_GRAVITY
feature -DYNAMIC_FILTER
feature LED_STRIP
beeper -SYSTEM_INIT
beeper -ON_USB
beeper -CRASH_FLIP
beacon RX_SET
serial 0 2048 115200 57600 0 115200
led 0 4,7::CO:2
led 1 5,7::CO:2
led 2 6,7::CO:2
led 3 7,7::CO:2
led 4 8,7::CO:2
aux 0 0 0 1675 2100 0 0
aux 1 1 1 900 1250 0 0
aux 2 2 1 1300 1700 0 0
aux 3 13 2 1700 2100 0 0
aux 4 35 2 1600 2100 0 0
aux 5 47 2 1300 1700 0 0
set gyro_lowpass2_type = BIQUAD
set gyro_lowpass2_hz = 0
set dyn_lpf_gyro_max_hz = 800
set acc_calibration = -131,-94,-4035
set min_check = 1010
set max_check = 2000
set rx_spi_protocol = FRSKY_D
set dshot_idle_value = 400
set motor_pwm_protocol = DSHOT600
set vbat_max_cell_voltage = 440
set vbat_min_cell_voltage = 320
set vbat_warning_cell_voltage = 330
set vbat_scale = 114
set ibata_scale = 1175
set beeper_dshot_beacon_tone = 5
set small_angle = 180
set pid_process_denom = 1
set osd_warn_esc_fail = OFF
set osd_vbat_pos = 2091
set osd_rssi_pos = 2081
set osd_tim_1_pos = 54
set osd_tim_2_pos = 2102
set osd_flymode_pos = 2456
set osd_g_force_pos = 65
set osd_throttle_pos = 2423
set osd_crosshairs_pos = 2253
set osd_current_pos = 2400
set osd_mah_drawn_pos = 2433
set osd_craft_name_pos = 2442
set osd_warnings_pos = 329
set osd_disarmed_pos = 2346
set gyro_1_sensor_align = CW90FLIP
profile 0
set dterm_lowpass2_type = BIQUAD
set dterm_lowpass2_hz = 150
set vbat_pid_gain = ON
set feedforward_transition = 30
set iterm_relax_type = GYRO
set iterm_relax_cutoff = 11
set p_pitch = 29
set i_pitch = 85
set d_pitch = 30
set f_pitch = 95
set p_roll = 24
set i_roll = 78
set d_roll = 26
set f_roll = 90
set p_yaw = 55
set i_yaw = 55
set d_yaw = 8
set f_yaw = 25
set angle_level_strength = 65
set horizon_level_strength = 65
set level_limit = 75
set d_min_boost_gain = 30
set d_min_advance = 0
rateprofile 2
set tpa_rate = 80
set tpa_breakpoint = 1700
rateprofile 0
set tpa_rate = 80
set tpa_breakpoint = 1700
set throttle_limit_type = SCALE
set throttle_limit_percent = 75
batch end

Mehr gute RC Teile oder Coupons auf Facebook:
https://www.facebook.com/kopterheld/

Aktuelle Kopterheld Coupons auf Telegram App:
https://t.me/KopterHeld

Mein Equipment: (Banggood)
Fatshark Dominator HDO – http://bit.ly/BgFaHDO
ImmersionRC RapidFIRE – http://bit.ly/BgRapidFire
FrSky X9D Plus SE Funke – http://bit.ly/2z4KxXG
FrSky Taranis X-Lite – http://bit.ly/BgXlite
FrSky R-XSR Empfänger – http://bit.ly/2S6rNyc
RunCam Racer 2 – http://bit.ly/2BZJCtq
RunCam Micro Eagle – http://bit.ly/2BPNnkL

Youtube – https://www.youtube.com/kopterheld
Facebook – https://www.facebook.com/kopterheld/
Blog – https://kopterheld.tv/
RCGroups – https://goo.gl/JYP87D
Telegram – https://t.me/KopterHeld
Instagram – https://instagram.com/kopterheld
Twitter – https://twitter.com/kopterheld

Unterstütze mein Youtube Kanal bei nächsten Einkauf bei Banggood oder Gearbest
Banggood – http://bit.ly/khBanggood
Gearbest – http://bit.ly/khGearbest