SPC Maker X3

SPC Maker XPKRC X3 135mm F4 20A BL_S FPV Racing Drohne mit 40CH VTX Runcam Micro Sparrow 2 Kamera.
Gute 3 Zoll Drohne mit guten Runcam Sparrow 2 Kamera, F4 FC und 20A ESC’s. Geflogen wird die X3 Drohne mit 3S und 4S Lipo. Optimal ist Tattu 650mAh 3S 75C Akku.
Banggood – http://bit.ly/2AvSGWz

Weitere Infos bei www.spcmaker.com

Vorteile:
– unter 150 Gramm RTF 3 Zoll FPV Racer
– gute Runcam Kamera
– gute Motoren 1106 4500KV
– F4 FC mit 20A ESC’s DSHOT600 BLheli_S
– Gute EMAX Avan 3 Zoll Propeller

Nachteile:
– Video Sender is per Knopf einstellbar (kein SmartAudio)
– Video Antenne nur linear

Passende Akkus:
Tattu 650mAh 3S 11.1V 75C 3S1P Lipo Pack Akku mit XT30 Stecker
Sehr guter 3S LiPo für 2 Zoll Racer wie Diatone GT-R90
14€ – Amazon – https://amzn.to/2Q3hdvW

Propeller:
Emax Avan Mini 3×2.4 3-Blatt
Amazon https://amzn.to/34mM2ys

Meine Konfiguration mit Flysky Empfänger
Die PID Werte sind von Betaflight 4.0 GitHub für 3 Zoll Racer.
Auf dem X3 ist Betaflight 4.0.6 installiert mit folgenden Änderungen:

# diff 2019-08-30
# Betaflight / OMNIBUSF4SD (OBSD) 4.0.6 Sep  1 2019
batch start
name SPC-X3
feature -RX_PARALLEL_PWM
feature RX_SERIAL
feature LED_STRIP
beeper -SYSTEM_INIT
beeper -ON_USB
beeper -CRASH_FLIP
beacon RX_LOST
beacon RX_SET
serial 0 64 115200 57600 0 115200
serial 2 2048 115200 57600 0 115200
led 0 0,0::AW:1
led 1 1,0::A:0
aux 0 0 0 1700 2100 0 0
aux 1 1 1 900 1300 0 0
aux 2 2 1 1300 1700 0 0
aux 3 13 2 1700 2100 0 0
aux 4 47 2 1300 1700 0 0
set acc_calibration = -9,80,23
set mag_hardware = NONE
set baro_hardware = NONE
set rssi_channel = 16
set serialrx_provider = IBUS
set dshot_idle_value = 400
set motor_pwm_protocol = DSHOT600
set vbat_max_cell_voltage = 450
set vbat_min_cell_voltage = 320
set vbat_warning_cell_voltage = 330
set beeper_dshot_beacon_tone = 5
set deadband = 4
set yaw_deadband = 4
set pid_process_denom = 2
set osd_warn_core_temp = OFF
set osd_vbat_pos = 2370
set osd_rssi_pos = 2106
set osd_tim_1_pos = 54
set osd_tim_2_pos = 2423
set osd_flymode_pos = 2393
set osd_vtx_channel_pos = 377
set osd_current_pos = 385
set osd_mah_drawn_pos = 353
set osd_craft_name_pos = 2379
set osd_gps_speed_pos = 218
set osd_gps_lon_pos = 82
set osd_gps_lat_pos = 65
set osd_gps_sats_pos = 51
set osd_home_dir_pos = 302
set osd_home_dist_pos = 303
set osd_compass_bar_pos = 266
set osd_altitude_pos = 247
set osd_pid_roll_pos = 423
set osd_pid_pitch_pos = 455
set osd_pid_yaw_pos = 487
set osd_debug_pos = 1
set osd_power_pos = 321
set osd_pidrate_profile_pos = 345
set osd_warnings_pos = 2313
set osd_avg_cell_voltage_pos = 2402
set osd_pit_ang_pos = 257
set osd_rol_ang_pos = 289
set osd_battery_usage_pos = 392
set osd_disarmed_pos = 138
set osd_nheading_pos = 311
set osd_nvario_pos = 279
set osd_esc_tmp_pos = 82
set osd_esc_rpm_pos = 83
set vcd_video_system = NTSC
profile 0
set p_pitch = 20
set i_pitch = 60
set d_pitch = 22
set p_roll = 18
set d_roll = 21
set angle_level_strength = 80
set horizon_level_strength = 80
set level_limit = 85
set d_min_pitch = 0
rateprofile 0
set roll_srate = 80
set pitch_srate = 80
set yaw_srate = 80
batch end

Original Konfiguration
Auf dem ER349 ist original Betaflight 3.2.4:

# diff 2019-03-03
# Betaflight / OMNIBUSF4SD (OBSD) 3.2.4 Jan 10 2018 
feature MOTOR_STOP
feature LED_STRIP
feature DYNAMIC_FILTER
serial 0 64 115200 57600 0 115200
aux 0 0 0 1000 1700
aux 1 1 0 1275 1900
set serialrx_provider = SBUS
set osd_vbat_pos = 2124
set osd_rssi_pos = 40
set osd_tim_1_pos = 54
set osd_tim_2_pos = 2134
set osd_vtx_channel_pos = 377
set osd_crosshairs = 200
set osd_current_pos = 385
set osd_mah_drawn_pos = 353
set osd_gps_speed_pos = 218
set osd_gps_lon_pos = 82
set osd_gps_lat_pos = 65
set osd_gps_sats_pos = 51
set osd_home_dir_pos = 302
set osd_home_dist_pos = 303
set osd_compass_bar_pos = 266
set osd_altitude_pos = 247
set osd_pid_roll_pos = 423
set osd_pid_pitch_pos = 455
set osd_pid_yaw_pos = 487
set osd_debug_pos = 1
set osd_power_pos = 321
set osd_pidrate_profile_pos = 345
set osd_warnings_pos = 329
set osd_avg_cell_voltage_pos = 76
set osd_pit_ang_pos = 257
set osd_rol_ang_pos = 289
set osd_battery_usage_pos = 392
set osd_disarmed_pos = 138
set osd_nheading_pos = 311
set osd_nvario_pos = 279
set osd_esc_tmp_pos = 82
set osd_esc_rpm_pos = 83
profile 0
set setpoint_relax_ratio = 30
set dterm_setpoint_weight = 200
set p_pitch = 20
set i_pitch = 60
set d_pitch = 22
set p_roll = 18
set i_roll = 60
set d_roll = 21
set d_level = 100
rateprofile 0
set rc_rate = 120
set rc_rate_yaw = 195
set roll_srate = 80
set pitch_srate = 80
set yaw_srate = 80

Einstellungen VTX 25-100mW Band F ist Nr 3 nicht wie in Abbildung Nr.2
3x rot und 1x grün ist 5740mHz
-> Manuals bei BG

Der F4 FC 
Omnibus F4 bei SPCMaker
Oder Mnuals bei BangGood.com

Mehr gute RC Teile oder Coupons auf meinem Blog:
https://kopterheld.wordpress.com/2018/01/01/news/

Aktuelle Kopterheld Coupons auf Telegram App:
https://t.me/KopterHeld

Mein Equipment: (Banggood)
Fatshark Dominator HDO  – http://bit.ly/BgFaHDO
ImmersionRC RapidFIRE – http://bit.ly/BgRapidFire 
FrSky TARANIS Q X7 Funke – http://bit.ly/2zLLvJq
FrSky X9D Plus SE Funke – http://bit.ly/2z4KxXG
iRangeX IRX4 Plus Multi Modul – http://bit.ly/2QrTIeT
FrSky R-XSR Empfänger – http://bit.ly/2S6rNyc
RunCam Racer 2 – http://bit.ly/2BZJCtq
RunCam Micro Eagle – http://bit.ly/2BPNnkL

Facebook – https://www.facebook.com/kopterheld/
Blog – https://kopterheld.tv/
RCGroups – https://goo.gl/JYP87D
Telegram – https://t.me/KopterHeld
Instagram – https://instagram.com/kopterheld
Twitter – https://twitter.com/kopterheld