Diatone GTB339 3 Zoll FPV Racer

Diatone GTB339 Cube:
Banggood Coupon: AFFBG10   http://bit.ly/GtB339Cube

Sehr gute und schnelle 3S 3 Zoll Drohne die sehr leicht ist mit einer Runcam Nano 2 Kamera und TBS Pro32 Nano VTX

oder Diatone GTB229 Cube 8500KV 2S Version
105€ – $117 – Banggood Coupon: BGGTB  http://bit.ly/GtB229Cube
Sehr gute und schnelle 2S 2,5 Zoll Drohne die nur 43 Gramm wiegt mit einer Runcam Nano 2 Kamera und TBS Pro32 Nano VTX

Vorteile:
– leichter 3 Zoll FPV Racer
– gute Runcam Nano 2 Kamera
– starker VTX TBS Nano Pro 32 25-400mW
– sehr gute Motoren 1105
– F4 Board 3-4S 12A ESC’s
– externer Empfänger wie R-XSR, CrossFire

Nachteile:
– Kamera wie Runcam Racer Nano oder Foxeer Predator 4 Nano wäre noch besser
– Video Antenne nur linear
– Motoren etwas zu schnell mit 5500KV für 3S Akku

Video 1 – Diatone GTB339 Cube 3 Zoll FPV Micro Racer

Passende Akkus:
BETAFPV 300mAh 3S 45C – https://amzn.to/2ZkvZS7
GNB 300mAh 3S 45C – http://bit.ly/Gnb3s80c
GNB 450MAH 2S 80C – http://bit.ly/GNB2S450mah
Tattu 450mAh 3S 75C
Banggood – http://bit.ly/Tattu450mah4S
Amazon – https://amzn.to/2XqM1W3

GNB 300mAh 3S 30C 
Banggood – http://bit.ly/Gnb300mAh3S
Amazon – https://amzn.to/2xg3kOx

Happymodel 300mAh 3S 30C 
Banggood – http://bit.ly/M7Hd300mAh
Amazon – https://amzn.to/2IQ4zdY

Turnigy Nano-Tech 300mAh 3S 45C –
HobbyKing – http://bit.ly/2AHM5YR

Lipo Pad:
URUAV PADSTAR Lipo Silicon Pad – http://bit.ly/UruPadStar
Transparent Silicone Gel Pad Banggood – http://bit.ly/2N33W16

Propeller:
HQProp T3X2 – Banggood – http://bit.ly/HQPropT3X2
original Ersatz Propeller für Diatone GTB339

HQProp T3X3 – Banggood – http://bit.ly/HQPropT3X3
Die Propeller sollen noch besser sein als die HQ T3X2 und robuster

Runcam Nano 2 – Banggood – http://bit.ly/BgNano2
und genauso kleine Runcam Racer Nano – http://bit.ly/RunNano
Die Racer Nano kann besser die dunklen Bereiche darstellen.

Meine Konfiguration mit FrSky R-XSR
Die PID Werte sind original vom Diatone.
Auf dem GTB339 ist Betaflight 3.5.7 installiert mit folgenden Änderungen:

# diff 2019-08-23
# Betaflight / MAMBAF411 (MB41) 3.5.7 Jul  7 2019
name GTB339
feature -SOFTSERIAL
feature AIRMODE
beeper -SYSTEM_INIT
beeper -ON_USB
beeper -CRASH FLIP
beacon RX_LOST
beacon RX_SET
serial 1 2048 115200 57600 0 115200
aux 0 0 0 1850 2100 0 0
aux 1 1 1 900 1300 0 0
aux 2 2 1 1300 1700 0 0
aux 3 13 2 1700 2100 0 0
rxrange 0 987 2011
rxrange 1 987 2011
rxrange 2 987 2011
rxrange 3 987 2011
set gyro_lowpass_hz = 80
set gyro_lowpass2_hz = 350
set acc_calibration = 24,-48,149
set rssi_channel = 8
set motor_pwm_protocol = DSHOT600
set align_board_yaw = -90
set vbat_max_cell_voltage = 45
set vbat_min_cell_voltage = 31
set vbat_warning_cell_voltage = 32
set current_meter = NONE
set beeper_dshot_beacon_tone = 5
set small_angle = 180
set deadband = 4
set yaw_deadband = 4
set pid_process_denom = 1
set osd_cap_alarm = 700
set osd_vbat_pos = 2497
set osd_rssi_pos = 2433
set osd_tim_2_pos = 2518
set osd_anti_gravity_pos = 385
set osd_vtx_channel_pos = 439
set osd_current_pos = 233
set osd_mah_drawn_pos = 396
set osd_craft_name_pos = 2508
set osd_pidrate_profile_pos = 409
set osd_warnings_pos = 329
set osd_avg_cell_voltage_pos = 2465
profile 0
set dterm_notch_cutoff = 0
set anti_gravity_gain = 8000
set p_pitch = 22
set i_pitch = 31
set d_pitch = 25
set p_roll = 20
set i_roll = 32
set p_yaw = 27
set i_yaw = 32
set p_level = 85
set level_limit = 85
rateprofile 0
set tpa_rate = 30
set tpa_breakpoint = 1450

Original Konfiguration
Auf dem GTB339 ist original Betaflight 3.5.7:

# diff 2019-08-22
# Betaflight / MAMBAF411 (MB41) 3.5.7 Jul  7 2019
name DIATONE
beacon RX_LOST
beacon RX_SET
serial 1 2048 115200 57600 0 115200
aux 0 0 0 1850 2100 0 0
aux 1 13 2 1700 2100 0 0
aux 2 28 0 1700 2100 0 0
set gyro_lowpass_hz = 80
set gyro_lowpass2_hz = 350
set motor_pwm_protocol = DSHOT600
set align_board_yaw = -90
set current_meter = NONE
set beeper_dshot_beacon_tone = 5
set small_angle = 180
set pid_process_denom = 1
set osd_cap_alarm = 700
set osd_vbat_pos = 2497
set osd_tim_2_pos = 2518
set osd_anti_gravity_pos = 2433
set osd_vtx_channel_pos = 2487
set osd_current_pos = 233
set osd_mah_drawn_pos = 396
set osd_craft_name_pos = 2102
set osd_pidrate_profile_pos = 409
set osd_warnings_pos = 329
set osd_avg_cell_voltage_pos = 2465
set vtx_band = 5
set vtx_channel = 3
set vtx_freq = 5732
profile 0
set dterm_notch_cutoff = 0
set anti_gravity_gain = 8000
set p_pitch = 22
set i_pitch = 31
set d_pitch = 25
set p_roll = 20
set i_roll = 32
set p_yaw = 27
set i_yaw = 32
rateprofile 0
set tpa_rate = 30
set tpa_breakpoint = 1450

Mehr gute RC Teile oder Coupons auf meinem Blog:
https://kopterheld.wordpress.com/2018/01/01/news/

Aktuelle Kopterheld Coupons auf Telegram App:
https://t.me/KopterHeld

Mein Equipment: (Banggood)
Fatshark Dominator HDO  – http://bit.ly/BgFaHDO
ImmersionRC RapidFIRE – http://bit.ly/BgRapidFire 
FrSky TARANIS Q X7 Funke – http://bit.ly/2zLLvJq
FrSky X9D Plus SE Funke – http://bit.ly/2z4KxXG
iRangeX IRX4 Plus Multi Modul – http://bit.ly/2QrTIeT
FrSky R-XSR Empfänger – http://bit.ly/2S6rNyc
RunCam Racer 2 – http://bit.ly/2BZJCtq
RunCam Micro Eagle – http://bit.ly/2BPNnkL

Facebook – https://www.facebook.com/kopterheld/
Blog – https://kopterheld.tv/
RCGroups – https://goo.gl/JYP87D
Telegram – https://t.me/KopterHeld
Instagram – https://instagram.com/kopterheld
Twitter – https://twitter.com/kopterheld