iFlight Nazgul5 V2 mit XING-E 2207 1800KV 6S Motoren mit SucceX-E F4, 45A ESC’s und verbessertes Frame, Caddx Ratel Kamera mit 25-800mW sehr gutem Video Sender VTX.

iFlight Nazgul5 V2 6S 5 Inch
Coupon: BGBFNG5V21 – https://www.banggood.com/custlink/DGKyJaPMya

Banggood – https://www.banggood.com/custlink/DGKyJaPMya

iFlight Nazgul5 V2 4S 5 Inch
Banggood – https://www.banggood.com/custlink/G3KEJjHzYB

Coupon: BG11RacEr oder BGTT10

Mein Video – iFlight Nazgul5 V2 der perfekter 5 Zoll Quad
Oben die GoPro8 Kamera unten die gute Caddx Ratel Kamera
6S F4 FC mit 45A Blheli_S ESC’s
Der dicker 6S GNB Akku mit 1350mAh hält hier ca. 4min Flugzeit
Hier die 6S 2207 1800KV Motoren gut geschützt mit dem gelben TPU
Diesmal sind die iFlight Propeller gelb und gut
Hinten iFlight RHCP Antenne
GoPro Mount hier noch das mit 30 Grad Neigung, die neuen iFlight GoPro Mount’s sind mit einer Schraube befestigt in der Winkel einstellbar.
Nazgul5 V2 wiegt 399 Gramm und mit dem GNB Akku sind es 603 Gramm. Mit der GoPro 8 Kamera sind es 750 Gramm

iFlight Nazgul5 HD XL5 V5 Frame
Coupon: BGTT10 – https://www.banggood.com/custlink/GvGytosOVi
Sehr gutes Frame, original vom Nazgul5 V2 und HD. Passend für Analog VTX oder Vista Modul. 5mm dicke Arme.

iFlight TPU Adjustable Camer Mount for GoPro
Coupon: BGTT10 – https://www.banggood.com/custlink/Gm3Y5eKe2u
TPU Mount für eine GoPro 5/6/7/8 Neigungswinkel einstellbar. 31,70 Gramm bei GoPro 8 Mount und 27,20 GRamm GoPro 5-7. Der Fuss passt für iFlight TITAN XL5 SL5 DC5 Quad

TPU Adjustable GoPro 5/6/7/8 Mount
Coupon: BGTT10 – https://www.banggood.com/custlink/3DDRWDipkF
TPU Mount für eine GoPro 5/6/7/8 Neigungswinkel einstellbar. 31,70 Gramm bei GoPro 8 Mount und 27,20 GRamm GoPro 5-7. Ein ND8 Filter kann hier eingesetz werden. Der Fuss passt für iFlight TITAN XL5/DC5/Nazgul5/SL5/SL5-E Quad

iFlight TPU Camera Mount for Gopro 9
Coupon: BGTT10 – https://www.banggood.com/custlink/vmvEF0KBkV
TPU Mount für eine GoPro 9 Neigungswinkel einstellbar. 35 Gramm. Der Fuss passt für iFlight TITAN XL5 / SL5 / DC5 Quad

Original Einstellungen mit BetaFlight 4.2.0


# Original Einstellungen 20201026
# diff all
# version
# Betaflight / STM32F405 (S405) 4.2.0 Jun 14 2020 / 03:04:22 (8f2d21460) MSP API: 1.43
# config: manufacturer_id: IFRC, board_name: IFLIGHT_SUCCEX_E_F4, version: 56f10df3, date: 2020-08-02T12:23:22Z
# start the command batch
batch start
# reset configuration to default settings
defaults nosave
board_name IFLIGHT_SUCCEX_E_F4
manufacturer_id IFRC
mcu_id 002100324152501620303754
signature 
# name: XL5 V5
# feature
feature -DISPLAY
feature AIRMODE
# beacon
beacon RX_LOST
beacon RX_SET
# serial
serial 5 1024 115200 57600 0 115200
# led
led 0 0,0::C:4
led 1 0,0::C:0
led 2 0,0::C:0
led 3 0,0::C:0
led 4 0,0::C:0
# aux
aux 0 0 0 1700 2100 0 0
aux 1 1 1 900 2100 0 0
# vtxtable
vtxtable bands 6
vtxtable channels 8
vtxtable band 1 BOSCAM_A A CUSTOM  5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B CUSTOM  5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E CUSTOM  5705 5685 5665    0 5885 5905    0    0
vtxtable band 4 FATSHARK F CUSTOM  5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R CUSTOM  5658 5695 5732 5769 5806 5843 5880 5917
vtxtable band 6 IMD6     I CUSTOM  5732 5765 5828 5840 5866 5740    0    0
vtxtable powerlevels 4
vtxtable powervalues 25 100 400 600
vtxtable powerlabels 25 100 400 800
# master
set gyro_lowpass2_hz = 500
set dyn_notch_width_percent = 0
set dyn_notch_q = 250
set dyn_notch_min_hz = 100
set dyn_notch_max_hz = 300
set dyn_lpf_gyro_min_hz = 400
set dyn_lpf_gyro_max_hz = 1000
set acc_calibration = -39,27,238,1
set baro_hardware = NONE
set rc_smoothing_derivative_type = PT1
set dshot_idle_value = 750
set dshot_bidir = ON
set motor_pwm_protocol = DSHOT300
set vbat_max_cell_voltage = 450
set ibata_offset = 0
set beeper_dshot_beacon_tone = 2
set yaw_motors_reversed = ON
set small_angle = 180
set yaw_deadband = 5
set pid_process_denom = 2
set osd_vbat_pos = 374
set osd_rssi_pos = 262
set osd_tim_2_pos = 2485
set osd_throttle_pos = 2453
set osd_vtx_channel_pos = 2517
set osd_current_pos = 2465
set osd_mah_drawn_pos = 2498
set osd_craft_name_pos = 2474
set osd_warnings_pos = 14729
set osd_avg_cell_voltage_pos = 2434
set debug_mode = GYRO_SCALED
set vtx_band = 5
set vtx_channel = 3
set vtx_power = 1
set vtx_freq = 5732
set gyro_1_align_yaw = 1800
set gyro_rpm_notch_q = 800
set name = XL5 V5
profile 0
# profile 0
set dyn_lpf_dterm_min_hz = 105
set dyn_lpf_dterm_max_hz = 255
set dyn_lpf_dterm_curve_expo = 6
set dterm_lowpass2_hz = 225
set vbat_sag_compensation = 100
set anti_gravity_gain = 4500
set feedforward_transition = 40
set iterm_relax_cutoff = 10
set yaw_lowpass_hz = 70
set throttle_boost_cutoff = 10
set p_pitch = 51
set f_pitch = 124
set p_roll = 46
set f_roll = 117
set p_yaw = 50
set f_yaw = 117
set ff_interpolate_sp = AVERAGED_3
set ff_spike_limit = 55
set ff_smooth_factor = 40
profile 1
profile 2
# restore original profile selection
profile 0
rateprofile 0
rateprofile 1
rateprofile 2
rateprofile 3
rateprofile 4
rateprofile 5
# restore original rateprofile selection
rateprofile 0
# save configuration
save